391F0-2FDA0 original ECU files
4 original (stock) ECU files with the hardware number 391F0-2FDA0 — Bosch EDC17C57, used in Hyundai vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 391F0-2FDA0 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 71TMC4NAICDIR003 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391F0-2FDA0 | 71TMC4NAICDIR003 | — | €20 · Open |
| 71TMC4NAICDIR003 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391F0-2FDA0 | 71TMC4NAICDIR003 | 71TMC4NAICDIR003 6040 | €20 · Open |
| 71TMC4NAICDIR004 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391F0-2FDA0 | 71TMC4NAICDIR004 | 71TMC4NAICDIR004 9582 | €20 · Open |
| 71TMC4NAICDIR005 Hyundai Tucson2.0 136hp | Bosch EDC17C57 | 391F0-2FDA0 | 71TMC4NAICDIR005 | 71TMC4NAICDIR005 4591 | €20 · Open |
No file in this list matches. Search all original files →
About 391F0-2FDA0
391F0-2FDA0 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch EDC17C57 (4 files) control units.
Our catalogue lists them for the Hyundai Tucson (2.0 136hp).
Other numbers on these files: 3 software numbers (71TMC4NAICDIR003, 71TMC4NAICDIR004, 71TMC4NAICDIR005); 3 calibration / SW upgrade numbers (71TMC4NAICDIR003_6040, 71TMC4NAICDIR004_9582, 71TMC4NAICDIR005_4591), listed on 3 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 391F0-2FDA0
- Files
- 4
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 391F02FDA0 · 391F0 2FDA0
ECU types with 391F0-2FDA0 1
Vehicles with 391F0-2FDA0 1
Tuning for Bosch EDC17C57 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 391F0-2FDA0 listed for?
In our catalogue: Hyundai Tucson (2.0 136hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 391F0-2FDA0?
In our catalogue 391F0-2FDA0 is on files read from Bosch EDC17C57 (4 files) control units.
There are several 391F0-2FDA0 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.