348A2100 original ECU files
2 original (stock) ECU files with the SW upgrade number 348A2100 — Denso GEN1, used in Lexus vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 348A2100 files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 89661-48161 89663-48A01 Lexus RX3.3 211hp · 3MZ-FE | Denso GEN1 | 89661-48161 | 89663-48A01 | 348A2100 | €20 · Open |
| 89663-48A21 Lexus RX3.3 211hp | Denso GEN1 | — | 89663-48A21 | 348A210A | €20 · Open |
No file in this list matches. Search all original files →
About 348A2100
348A2100 is on 2 original (stock) ECU files in our catalogue: as the SW upgrade number on 2 files and as the calibration on 1 file.
They were read from Denso GEN1 (2 files) control units.
Our catalogue lists them for the Lexus RX (3.3 211hp).
Other numbers on these files: 1 hardware number (89661-48161), listed on 1 of the 2 files; 2 software numbers (89663-48A01, 89663-48A21); 1 calibration / SW upgrade number (348A210A), listed on 1 of the 2 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 348A2100
- Files
- 2
- Found as
- SW upgrade number and calibration
- ECU types
- 1
- Vehicles
- 1
ECU types with 348A2100 1
Vehicles with 348A2100 1
Tuning for Denso GEN1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 348A2100 listed for?
In our catalogue: Lexus RX (3.3 211hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 348A2100?
In our catalogue 348A2100 is on files read from Denso GEN1 (2 files) control units.
There are several 348A2100 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.