30KP9100 original ECU files
2 original (stock) ECU files with the calibration 30KP9100 — Denso GEN1, used in Toyota vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 30KP9100 files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Toyota Fortuner2.5 142hp | Denso GEN1 | — | — | 30KP9100 | €20 · Open |
| 89663-0KP91 Toyota Hilux3.0 171hp | Denso GEN1 | — | 89663-0KP91 | 30KP9100 | €20 · Open |
No file in this list matches. Search all original files →
About 30KP9100
30KP9100 is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files and as the SW upgrade number on 1 file.
They were read from Denso GEN1 (2 files) control units.
Our catalogue lists them for the Toyota Fortuner (2.5 142hp) and Toyota Hilux (3.0 171hp).
Other numbers on these files: 1 software number (89663-0KP91), listed on 1 of the 2 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 30KP9100
- Files
- 2
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
ECU types with 30KP9100 1
Vehicles with 30KP9100 2
More Denso GEN1 numbers 24
Tuning for Denso GEN1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 30KP9100 listed for?
In our catalogue: Toyota Fortuner (2.5 142hp) and Toyota Hilux (3.0 171hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 30KP9100?
In our catalogue 30KP9100 is on files read from Denso GEN1 (2 files) control units.
There are several 30KP9100 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.