0DL300012E original ECU files
6 original (stock) ECU files with the part number 0DL300012E — Temic DQ500, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0DL300012E files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0DL300012E 2011 Audi RS32.5 401hp | Temic DQ500 | — | — | 0DL300012E 2011 | €20 · Open |
| 0DL300012E 2012 Audi RS32.5 401hp | Temic DQ500 | — | — | 0DL300012E 2012 | €20 · Open |
| 0DL300012E 2012 Audi RS32.5 401hp | Temic DQ500 | 0DL300012E | 2012 | 0DL300012E 2012 | €20 · Open |
| 0DL300012E 2012 Volkswagen Tiguan2.0 180hp | Temic DQ500 | — | — | 0DL300012E 2012 | €20 · Open |
| 0DL300012E 2011 Volkswagen Tiguan2.0 220hp | Temic DQ500 | — | — | 0DL300012E 2011 | €20 · Open |
| 0DL300012E 2011 Volkswagen Tiguan2.0 220hp | Temic DQ500 | 0DL300012E | 2011 | 0DL300012E 2011 | €20 · Open |
No file in this list matches. Search all original files →
About 0DL300012E
0DL300012E is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files, as the SW upgrade number on 6 files and as the hardware number on 2 files.
They were read from Temic DQ500 (6 files) control units.
Our catalogue lists them for the Audi RS3 (2.5 401hp) and Volkswagen Tiguan (2.0 220hp, 2.0 180hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0DL300012E
- Files
- 6
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 0DL 300 012 E
ECU types with 0DL300012E 1
Vehicles with 0DL300012E 2
Tuning for Temic DQ500 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0DL300012E listed for?
In our catalogue: Audi RS3 (2.5 401hp) and Volkswagen Tiguan (2.0 220hp, 2.0 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0DL300012E?
In our catalogue 0DL300012E is on files read from Temic DQ500 (6 files) control units.
There are several 0DL300012E files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.