0BT300045T original ECU files
2 original (stock) ECU files with the part number 0BT300045T — Temic DQ500, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0BT300045T files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0BT300045T 2411 Volkswagen Transporter2.0 140hp | Temic DQ500 | — | — | 0BT300045T 2411 | €20 · Open |
| 0BH927711C 2236001001 Volkswagen Transporter2.0 140hp | Temic DQ500 | 0BH927711C | 2236001001 | 0BT300045T 2404 | €20 · Open |
No file in this list matches. Search all original files →
About 0BT300045T
0BT300045T is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files and as the SW upgrade number on 2 files.
They were read from Temic DQ500 (2 files) control units.
Our catalogue lists them for the Volkswagen Transporter (2.0 140hp).
Other numbers on these files: 1 hardware number (0BH927711C), listed on 1 of the 2 files; 1 software number (2236001001), listed on 1 of the 2 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0BT300045T
- Files
- 2
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 0BT 300 045 T
ECU types with 0BT300045T 1
Vehicles with 0BT300045T 1
Tuning for Temic DQ500 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0BT300045T listed for?
In our catalogue: Volkswagen Transporter (2.0 140hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0BT300045T?
In our catalogue 0BT300045T is on files read from Temic DQ500 (2 files) control units.
There are several 0BT300045T files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.