0CW300048S original ECU files
6 original (stock) ECU files with the part number 0CW300048S — Temic DQ200 MQB GEN2, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0CW300048S files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0CW300048S 6501 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | — | — | 0CW300048S 6501 | €20 · Open |
| 0CW300048S 6502 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | 0CW300048S | 6502 | 0CW300048S 6502 | €20 · Open |
| 0CW300048S 6560 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | 0CW300048S | 6560 | 0CW300048S 6560 | €20 · Open |
| 0CW300048S 6561 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | 0CW300048S | 6561 | 0CW300048S 6561 | €20 · Open |
| 0CW300048S 6561 Volkswagen Golf 61.4 122hp · CAXA | Temic DQ200 MQB GEN2 | — | — | 0CW300048S 6561 | €20 · Open |
| 0CW300048S J743 Volkswagen Polo1.2 90hp | Temic DQ200 MQB GEN2 | — | — | 0CW300048S J743 | €20 · Open |
No file in this list matches. Search all original files →
About 0CW300048S
0CW300048S is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files, as the SW upgrade number on 5 files and as the hardware number on 3 files.
They were read from Temic DQ200 MQB GEN2 (6 files) control units.
Our catalogue lists them for the Volkswagen Golf (1.6 110hp), Volkswagen Golf 6 (1.4 122hp) and Volkswagen Polo (1.2 90hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0CW300048S
- Files
- 6
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 0CW 300 048 S
ECU types with 0CW300048S 1
Vehicles with 0CW300048S 3
Tuning for Temic DQ200 MQB GEN2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0CW300048S listed for?
In our catalogue: Volkswagen Golf (1.6 110hp), Volkswagen Golf 6 (1.4 122hp) and Volkswagen Polo (1.2 90hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0CW300048S?
In our catalogue 0CW300048S is on files read from Temic DQ200 MQB GEN2 (6 files) control units.
There are several 0CW300048S files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.