0CW300046P original ECU files
4 original (stock) ECU files with the hardware number 0CW300046P — Temic DQ200 MQB GEN2, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0CW300046P files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0CW300046P 6202 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | — | — | 0CW300046P 6202 | €20 · Open |
| 0CW300046P 6220 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | — | — | 0CW300046P 6220 | €20 · Open |
| 0CW300046P 6230 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | 0CW300046P | 6230 | 0CW300046P 6230 | €20 · Open |
| 0CW300046P 6231 Volkswagen Golf1.6 110hp | Temic DQ200 MQB GEN2 | 0CW300046P | 6231 | 0CW300046P 6231 | €20 · Open |
No file in this list matches. Search all original files →
About 0CW300046P
0CW300046P is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 4 files and as the hardware number on 2 files.
They were read from Temic DQ200 MQB GEN2 (4 files) control units.
Our catalogue lists them for the Volkswagen Golf (1.6 110hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0CW300046P
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 0CW 300 046 P
ECU types with 0CW300046P 1
Vehicles with 0CW300046P 1
Tuning for Temic DQ200 MQB GEN2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0CW300046P listed for?
In our catalogue: Volkswagen Golf (1.6 110hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0CW300046P?
In our catalogue 0CW300046P is on files read from Temic DQ200 MQB GEN2 (4 files) control units.
There are several 0CW300046P files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.