0BH300011S original ECU files
4 original (stock) ECU files with the part number 0BH300011S — Temic DQ500, used in Audi, Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0BH300011S files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0BH300011S 1807 Audi Q32.0 150hp | Temic DQ500 | — | — | 0BH300011S 1807 | €20 · Open |
| 0BH300011S 1807 Audi RS32.5 340hp | Temic DQ500 | — | — | 0BH300011S 1807 | €20 · Open |
| 0BH300011S 5220 Volkswagen Transporter2.0 140hp | Temic DQ500 | — | — | 0BH300011S 5220 | €20 · Open |
| 0BH300011S 5250 Volkswagen Transporter2.0 140hp | Temic DQ500 | 0BH300011S | 5250 | 0BH300011S 5250 | €20 · Open |
No file in this list matches. Search all original files →
About 0BH300011S
0BH300011S is on 4 original (stock) ECU files in our catalogue: as the SW upgrade number on 4 files, as the calibration on 4 files and as the hardware number on 1 file.
They were read from Temic DQ500 (4 files) control units.
Our catalogue lists them for the Volkswagen Transporter (2.0 140hp), Audi Q3 (2.0 150hp) and Audi RS3 (2.5 340hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0BH300011S
- Files
- 4
- Found as
- SW upgrade number, calibration and hardware number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 0BH 300 011 S
ECU types with 0BH300011S 1
Vehicles with 0BH300011S 3
More Temic DQ500 numbers 24
Tuning for Temic DQ500 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0BH300011S listed for?
In our catalogue: Volkswagen Transporter (2.0 140hp), Audi Q3 (2.0 150hp) and Audi RS3 (2.5 340hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0BH300011S?
In our catalogue 0BH300011S is on files read from Temic DQ500 (4 files) control units.
There are several 0BH300011S files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.