0BH300011Q original ECU files
5 original (stock) ECU files with the hardware number 0BH300011Q — Temic DQ500, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0BH300011Q files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0BH300011Q 1716 Audi RS32.5 20v TFSI 340hp | Temic DQ500 | — | — | 0BH300011Q 1716 | €20 · Open |
| 0BH300011Q 1717 Audi RS32.5 20v TFSI 340hpMap pack · 64 maps | Temic DQ500 | — | — | 0BH300011Q 1717 | €20 · OpenWith maps €60 |
| 0BH300011Q 1716 Audi RS32.5 20v TFSI 340hp | Temic DQ500 | 0BH300011Q | 1716 | 0BH300011Q 1716 | €20 · Open |
| 0BH300011Q 1717 Audi RS32.5 20v TFSI 340hp | Temic DQ500 | 0BH300011Q | 1717 | 0BH300011Q 1717 | €20 · Open |
| 0BH300011Q 1717 Audi RS32.5 340hp | Temic DQ500 | 0BH300011Q | 1717 | 0BH300011Q 1717 | €20 · Open |
No file in this list matches. Search all original files →
About 0BH300011Q
0BH300011Q is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 5 files and as the hardware number on 3 files.
They were read from Temic DQ500 (5 files) control units.
Our catalogue lists them for the Audi RS3 (2.5 20v TFSI 340hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0BH300011Q
- Files
- 5
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 0BH 300 011 Q
ECU types with 0BH300011Q 1
Vehicles with 0BH300011Q 1
Tuning for Temic DQ500 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0BH300011Q listed for?
In our catalogue: Audi RS3 (2.5 20v TFSI 340hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0BH300011Q?
In our catalogue 0BH300011Q is on files read from Temic DQ500 (5 files) control units.
There are several 0BH300011Q files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.