Part number · 5 files

06K906070K original ECU files

5 original (stock) ECU files with the part number 06K906070K — Siemens SIMOS12.2, used in Volkswagen, Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
3models
2makes

All 06K906070K files 5

VehicleECUHWSWCalibration / upgrade
CASC1C91.DAT 10253439AA Audi A32.0 280hp · CJXB Siemens SIMOS12.2 CASC1C91.DAT 10253439AA 06K906070K 5795 €20 · Open
06K906070K 8091 Volkswagen Beetle2.0 211hp · CJXB Siemens SIMOS12.2 — — 06K906070K 8091 €20 · Open
06K906070K 6107 Volkswagen Beetle2.0 211hp Siemens SIMOS12.2 06K906070K 6107 06K906070K 6107 €20 · Open
06K906070K 8044 Volkswagen Beetle2.0 211hp Siemens SIMOS12.2 06K906070K 8044 06K906070K 8044 €20 · Open
06K906070K 6276 Volkswagen Jetta2.0 211hp Siemens SIMOS12.2 — — 06K906070K 6276 €20 · Open

About 06K906070K

06K906070K is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 5 files and as the hardware number on 2 files.

They were read from Siemens SIMOS12.2 (5 files) control units.

Our catalogue lists them for the Volkswagen Beetle (2.0 211hp), Audi A3 (2.0 280hp) and Volkswagen Jetta (2.0 211hp).

Other numbers on these files: 1 software number (10253439AA), listed on 1 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
06K906070K
Files
5
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
3
Also written as
06K 906 070 K

ECU types with 06K906070K 1

Vehicles with 06K906070K 3

Need a modified file?

Tuning for Siemens SIMOS12.2 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 06K906070K listed for?

In our catalogue: Volkswagen Beetle (2.0 211hp), Audi A3 (2.0 280hp) and Volkswagen Jetta (2.0 211hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 06K906070K?

In our catalogue 06K906070K is on files read from Siemens SIMOS12.2 (5 files) control units.

There are several 06K906070K files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.