06K906070F original ECU files
5 original (stock) ECU files with the part number 06K906070F — Siemens SIMOS12.2, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 06K906070F files 5
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 06K906070F 9360 Volkswagen Passat 81.8 160hp · CJXB | Siemens SIMOS12.2 | — | — | 06K906070F 9360 | €20 · Open |
| CASC2G51.DAT 10301228AA Volkswagen Passat 81.8 160hp · CJXB | Siemens SIMOS12.2 | CASC2G51.DAT | 10301228AA | 06K906070F 6865 | €20 · Open |
| CASC2G51.DAT 10301228AA Volkswagen Passat 81.8 160hp · CJXB | Siemens SIMOS12.2 | CASC2G51.DAT | 10301228AA | 06K906070F 7649 | €20 · Open |
| 06K906070F 6275 Volkswagen Passat 81.8 160hp | Siemens SIMOS12.2 | 06K906070F | 6275 | 06K906070F 6275 | €20 · Open |
| 06K906070F 8052 Volkswagen Passat 81.8 160hp | Siemens SIMOS12.2 | 06K906070F | 8052 | 06K906070F 8052 | €20 · Open |
No file in this list matches. Search all original files →
About 06K906070F
06K906070F is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 5 files and as the hardware number on 2 files.
They were read from Siemens SIMOS12.2 (5 files) control units.
Our catalogue lists them for the Volkswagen Passat 8 (1.8 160hp).
Other numbers on these files: 1 software number (10301228AA), listed on 2 of the 5 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 06K906070F
- Files
- 5
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 06K 906 070 F
ECU types with 06K906070F 1
Vehicles with 06K906070F 1
Tuning for Siemens SIMOS12.2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 06K906070F listed for?
In our catalogue: Volkswagen Passat 8 (1.8 160hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 06K906070F?
In our catalogue 06K906070F is on files read from Siemens SIMOS12.2 (5 files) control units.
There are several 06K906070F files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.