06A906032S original ECU files
3 original (stock) ECU files with the part number 06A906032S — Bosch ME7.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
ECU types with 06A906032S 1
Vehicles with 06A906032S 2
About 06A906032S
06A906032S is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files and as the SW upgrade number on 1 file.
They were read from Bosch ME7.5 (3 files) control units.
Our catalogue lists them for the Audi A3 (1.8 180hp) and Audi TT (1.8 20V Turbo 225hp).
Other numbers on these files: 1 hardware number (0261206197); 3 software numbers (1037352356, 1037352760, 1037359598).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 06A906032S
- Files
- 3
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 06A 906 032 S
All 06A906032S files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0261206197 1037352356 Audi A31.8 180hp | Bosch ME7.5 | 0261206197 | 1037352356 | 06A906032S 0002 | €20 · Open |
| 0261206197 1037352760 Audi A31.8 180hp | Bosch ME7.5 | 0261206197 | 1037352760 | 06A906032S 0004 | €20 · Open |
| 0261206197 1037359598 Audi TT1.8 20V TURBO 225hp | Bosch ME7.5 | 0261206197 | 1037359598 | 06A906032S 0001 | €20 · Open |
Tuning for Bosch ME7.5 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 06A906032S listed for?
In our catalogue: Audi A3 (1.8 180hp) and Audi TT (1.8 20V Turbo 225hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 06A906032S?
In our catalogue 06A906032S is on files read from Bosch ME7.5 (3 files) control units.
There are several 06A906032S files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.