Part number · 5 files

06A906032DL original ECU files

5 original (stock) ECU files with the part number 06A906032DL — Bosch ME7.5, Bosch ME7.5.5, used in Volkswagen vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
2ECU types
1models
1makes

All 06A906032DL files 5

VehicleECUHWSWCalibration / upgrade
0261206890 1037354821 Volkswagen Golf 41.8 150hp Bosch ME7.5.5 0261206890 1037354821 06A906032DL 0002 €20 · Open
0261206890 1037354821 Volkswagen Golf 41.8 150hp Bosch ME7.5 0261206890 1037354821 06A906032DL 0002 €20 · Open
0261206890 1037360227 Volkswagen Golf 41.8 150hp Bosch ME7.5 0261206890 1037360227 06A906032DL 0003 €20 · Open
0261206890 1037368009 Volkswagen Golf 41.8 20V TURBO 150hp Bosch ME7.5 0261206890 1037368009 06A906032DL 0006 €20 · Open
0261206890 1037360227 Volkswagen Golf 41.8 20V TURBO 180hp Bosch ME7.5 0261206890 1037360227 06A906032DL 0003 €20 · Open

About 06A906032DL

06A906032DL is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files and as the SW upgrade number on 4 files.

They were read from Bosch ME7.5 (4 files) and Bosch ME7.5.5 (1 file) control units.

Our catalogue lists them for the Volkswagen Golf 4 (1.8 20V Turbo 150hp, 1.8 20V Turbo 180hp).

Other numbers on these files: 1 hardware number (0261206890); 3 software numbers (1037354821, 1037360227, 1037368009).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
06A906032DL
Files
5
Found as
calibration and SW upgrade number
ECU types
2
Vehicles
1
Also written as
06A 906 032 DL

ECU types with 06A906032DL 2

Vehicles with 06A906032DL 1

Need a modified file?

Tuning for 06A906032DL — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 06A906032DL listed for?

In our catalogue: Volkswagen Golf 4 (1.8 20V Turbo 150hp, 1.8 20V Turbo 180hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 06A906032DL?

In our catalogue 06A906032DL is on files read from Bosch ME7.5 (4 files) and Bosch ME7.5.5 (1 file) control units.

There are several 06A906032DL files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.