Hardware number · 7 files

03C906016S original ECU files

7 original (stock) ECU files with the hardware number 03C906016S — Bosch MED17.5.5, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

7files
1ECU types
1models
1makes

All 03C906016S files 7

VehicleECUHWSWCalibration / upgrade
03C906016S 3600 Audi A31.4 125hp · CAXC Bosch MED17.5.5 — — 03C906016S 3600 €20 · Open
03C906016S 8542 Audi A31.4 125hp · CAXC Bosch MED17.5.5 03C906016S 8542 03C906016S 8542 €20 · Open
03C906016S 9093 Audi A31.4 125hp · CAXC Bosch MED17.5.5 03C906016S 9093 03C906016S 9093 €20 · Open
03C906016S 9895 Audi A31.4 125hp · CAXC Bosch MED17.5.5 03C906016S 9895 03C906016S 9895 €20 · Open
03C906016S 4985 Audi A31.4 16v TFSI 125hp · CAXCMap pack · 42 maps Bosch MED17.5.5 03C906016S 4985 03C906016S 4985 €20 · OpenWith maps €60
03C906016S 5889 Audi A31.4 16v TFSI 125hp · CAXC Bosch MED17.5.5 03C906016S 5889 03C906016S 5889 €20 · Open
03C906016S 7355 Audi A31.4 16v TFSI 125hp · CAXC Bosch MED17.5.5 03C906016S 7355 03C906016S 7355 €20 · Open

About 03C906016S

03C906016S is on 7 original (stock) ECU files in our catalogue: as the calibration on 7 files, as the SW upgrade number on 7 files and as the hardware number on 6 files.

They were read from Bosch MED17.5.5 (7 files) control units.

Our catalogue lists them for the Audi A3 (1.4 16v TFSI 125hp).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
03C906016S
Files
7
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
1
Also written as
03C 906 016 S

ECU types with 03C906016S 1

Vehicles with 03C906016S 1

Need a modified file?

Tuning for Bosch MED17.5.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 03C906016S listed for?

In our catalogue: Audi A3 (1.4 16v TFSI 125hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 03C906016S?

In our catalogue 03C906016S is on files read from Bosch MED17.5.5 (7 files) control units.

There are several 03C906016S files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.