Hardware number · 5 files

03C906016G original ECU files

5 original (stock) ECU files with the hardware number 03C906016G — Bosch MED17.5.5, used in Skoda, Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
2models
2makes

All 03C906016G files 5

VehicleECUHWSWCalibration / upgrade
0261S04653 1037505629 Audi A31.4 125hp · CAXC Bosch MED17.5.5 0261S04653 1037505629 03C906016G 6351 €20 · Open
03C906016G 5343 Skoda Octavia1.4 122hp · CAXC Bosch MED17.5.5 03C906016G 5343 03C906016G 5343 €20 · Open
03C906016G 4054 Skoda Octavia1.4 125hp · CAXC Bosch MED17.5.5 03C906016G 4054 03C906016G 4054 €20 · Open
03C906016G 4989 Skoda Octavia1.4 125hp · CAXC Bosch MED17.5.5 03C906016G 4989 03C906016G 4989 €20 · Open
03C906016G 9064 Skoda Octavia1.4 16v TSI 122hp · CAXC Bosch MED17.5.5 03C906016G 9064 03C906016G 9064 €20 · Open

About 03C906016G

03C906016G is on 5 original (stock) ECU files in our catalogue: as the calibration on 5 files, as the SW upgrade number on 4 files and as the hardware number on 4 files.

They were read from Bosch MED17.5.5 (5 files) control units.

Our catalogue lists them for the Skoda Octavia (1.4 16v TSI 122hp, 1.4 125hp) and Audi A3 (1.4 125hp).

Other numbers on these files: 1 hardware number (0261S04653), listed on 1 of the 5 files; 1 software number (1037505629), listed on 1 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
03C906016G
Files
5
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
03C 906 016 G

ECU types with 03C906016G 1

Vehicles with 03C906016G 2

Need a modified file?

Tuning for Bosch MED17.5.5 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 03C906016G listed for?

In our catalogue: Skoda Octavia (1.4 16v TSI 122hp, 1.4 125hp) and Audi A3 (1.4 125hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 03C906016G?

In our catalogue 03C906016G is on files read from Bosch MED17.5.5 (5 files) control units.

There are several 03C906016G files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.