0261208500 original ECU files
4 original (stock) ECU files with the hardware number 0261208500 — Bosch ME7.5, Siemens PPD1.2, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 0261208500 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 1037369011 8E0909518AS 0003 Audi A41.8 190hp | Bosch ME7.5 | 0261208500 | 1037369011 | 8E0909518AS 0003 | €20 · Open |
| 8E0909518AS 0003 Audi A41.8 20V 163hp | Bosch ME7.5 | 0261208500 | — | 8E0909518AS 0003 | €20 · Open |
| 1037369011 03G906018DJ 0065 Audi A41.8 20V 163hp · BFB | Siemens PPD1.2 | 0261208500 | 1037369011 | 03G906018DJ 0065 | €20 · Open |
| 1037369011 8E0909518AS 0003 Audi A41.8 20V 163hp | Bosch ME7.5 | 0261208500 | 1037369011 | 8E0909518AS 0003 | €20 · Open |
No file in this list matches. Search all original files →
About 0261208500
0261208500 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch ME7.5 (3 files) and Siemens PPD1.2 (1 file) control units.
Our catalogue lists them for the Audi A4 (1.8 20V 163hp, 1.8 190hp).
Other numbers on these files: 1 software number (1037369011), listed on 3 of the 4 files; 2 calibration / SW upgrade numbers (8E0909518AS_0003, 03G906018DJ_0065).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 0261208500
- Files
- 4
- Found as
- hardware number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 0 261 208 500
ECU types with 0261208500 2
Vehicles with 0261208500 1
Tuning for 0261208500 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 0261208500 listed for?
In our catalogue: Audi A4 (1.8 20V 163hp, 1.8 190hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 0261208500?
In our catalogue 0261208500 is on files read from Bosch ME7.5 (3 files) and Siemens PPD1.2 (1 file) control units.
There are several 0261208500 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.