Siemens SIMOS10 original ECU files
Original (stock) files read from Siemens SIMOS10 engine control units: 15 files for 4 makes and 6 models. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Vehicles with a Siemens SIMOS10 ECU 6
All Siemens SIMOS10 files 15
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Audi A11.2 105hp | Siemens SIMOS10 | — | — | — | €20 · Open |
| 03F906070CA 8267 Audi A11.2 105hp · CBZB | Siemens SIMOS10 | — | — | 03F906070CA 8267 | €20 · Open |
| 03F906070CA 9677 Audi A11.2 105hp · CBZBMap pack · 37 maps | Siemens SIMOS10 | — | — | 03F906070CA 9677 | €20 · OpenWith maps €60 |
| Seat Leon1.2 105hp | Siemens SIMOS10 | — | — | — | €20 · Open |
| 03F906070HK 5471 Skoda Fabia1.2 105hp · CBZB | Siemens SIMOS10 | — | — | 03F906070HK 5471 | €20 · Open |
| Skoda Fabia1.2 86hp · CBZA | Siemens SIMOS10 | — | — | — | €20 · Open |
| Volkswagen Beetle1.2 105hp · CBZB | Siemens SIMOS10 | — | — | — | €20 · Open |
| 03F906070BJ 7233 Volkswagen Golf 61.2 105hp · CBZB | Siemens SIMOS10 | — | — | 03F906070BJ 7233 | €20 · Open |
| Volkswagen Golf 61.2 105hpMap pack · 21 maps | Siemens SIMOS10 | — | — | — | €20 · OpenWith maps €60 |
| 03F906070FS 2670 Volkswagen Golf 61.2 105hp · CBZB | Siemens SIMOS10 | — | — | 03F906070FS 2670 | €20 · Open |
| Volkswagen Golf 61.2 105hp | Siemens SIMOS10 | — | — | — | €20 · Open |
| Volkswagen Polo1.2 105hp | Siemens SIMOS10 | — | — | — | €20 · Open |
| 03F906070D 7230 Volkswagen Polo1.2 105hp · CBZB | Siemens SIMOS10 | — | — | 03F906070D 7230 | €20 · Open |
| 03F906070E 6898 Volkswagen Polo1.2 105hp · CBZBMap pack · 21 maps | Siemens SIMOS10 | — | — | 03F906070E 6898 | €20 · OpenWith maps €60 |
| Volkswagen Polo1.2 105hp · CBZB | Siemens SIMOS10 | — | — | — | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Calibration / SW upgrade · 7
Tuning for Siemens SIMOS10 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Siemens SIMOS10 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Siemens SIMOS10?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Siemens SIMOS10 (depending on the engine). Upload your read on our file service.