Volkswagen Polo Siemens SIMOS11.1 original ECU files
Original (stock) files read from the Siemens SIMOS11.1 control unit of the Volkswagen Polo: 15 files, 2 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Other ECU types in the Volkswagen Polo 86
Siemens SIMOS11.1 in other vehicles 1
Engine versions 2
All Volkswagen Polo Siemens SIMOS11.1 files 15
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | 03E906019C | 1435 | 03E906019C 1435 | €20 · Open |
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | — | — | 03E906019M 9877 | €20 · Open |
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | — | — | — | €20 · Open |
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | — | — | 03E906019B 8951 | €20 · Open |
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | 6576405378 | 6576405378 | — | €20 · Open |
| Volkswagen Polo1.2 70hp | Siemens SIMOS11.1 | — | — | 03E906019AH 5152 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019E | 9802 | 03E906019E 9802 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | — | — | 03E906019B 9804 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019C | 7509 | 03E906019C 7509 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019B | 5151 | 03E906019B 5151 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019B | 9490 | 03E906019B 9490 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019B | 9877 | 03E906019B 9877 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019M | 9877 | 03E906019M 9877 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | — | — | 03E906019M 9800 | €20 · Open |
| Volkswagen Polo1.2 75hp | Siemens SIMOS11.1 | 03E906019M | 9487 | 03E906019M 9487 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 5
Software (SW) · 1
Tuning for Volkswagen Polo Siemens SIMOS11.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Volkswagen Polo Siemens SIMOS11.1 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Volkswagen Polo Siemens SIMOS11.1?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Volkswagen Polo Siemens SIMOS11.1 (depending on the engine). Upload your read on our file service.