Audi S4 Temic DL501 GEN2 original ECU files
Original (stock) files read from the Temic DL501 GEN2 control unit of the Audi S4: 13 files, 1 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Other ECU types in the Audi S4 13
Temic DL501 GEN2 in other vehicles 3
Engine versions 1
All Audi S4 Temic DL501 GEN2 files 13
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 4G0927156M 0010 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8K1927156M 0004 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | — | €20 · Open |
| Audi S43.0 333hp · CEPA | Temic DL501 GEN2 | — | — | — | €20 · Open |
| Audi S43.0 333hp · CEPA | Temic DL501 GEN2 | — | A02043 | 8K1927156B 0003 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | 4G1927156D 0003 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | 8K5927156F 0002 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8K1927156G 0004 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | — | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | — | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | 4G2927156G 0002 | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | — | €20 · Open |
| Audi S43.0 333hp | Temic DL501 GEN2 | — | — | 8K1927156A 0002 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 1
Tuning for Audi S4 Temic DL501 GEN2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Audi S4 Temic DL501 GEN2 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Audi S4 Temic DL501 GEN2?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Audi S4 Temic DL501 GEN2 (depending on the engine). Upload your read on our file service.