A02087 original ECU files
18 original (stock) ECU files with the software number A02087 — Temic DL501, Temic DL501 GEN2, Temic DSG DL501, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All A02087 files 18
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0B5927156E 8K1927156AA 0006 Audi A5 Sportback2.0 211hp | Temic DL501 | 0B5927156E | A02087 | 8K1927156AA 0006 | €20 · Open |
| 0B5927156F 8K1927156G 0008 Audi A5 Sportback2.0 211hp | Temic DSG DL501 | 0B5927156F | A02087 | 8K1927156G 0008 | €20 · Open |
| 0B5927156F 8K1927156G 0009 Audi A5 Sportback2.0 211hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8K1927156G 0009 | €20 · Open |
| 0B5927156F 8K1927156L 0009 Audi A5 Sportback2.0 211hp | Temic DL501 | 0B5927156F | A02087 | 8K1927156L 0009 | €20 · Open |
| 0B5927156F 8R0927156Q 0009 Audi A5 Sportback2.0 211hp | Temic DL501 | 0B5927156F | A02087 | 8R0927156Q 0009 | €20 · Open |
| 0B5927156F 8R0927156S 0008 Audi A5 Sportback2.0 211hp | Temic DL501 | 0B5927156F | A02087 | 8R0927156S 0008 | €20 · Open |
| 0B5927156F 8T0927156B 0006 Audi A5 Sportback2.0 211hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8T0927156B 0006 | €20 · Open |
| 0B5927156F 4G0927156M 0013 Audi A63.0 245hp | Temic DL501 | 0B5927156F | A02087 | 4G0927156M 0013 | €20 · Open |
| 0B5927156F 4G1927156B 0001 Audi A63.0 245hp | Temic DL501 | 0B5927156F | A02087 | 4G1927156B 0001 | €20 · Open |
| 0B5927156F 8K2927156S 0001 Audi A63.0 245hpMap pack · 130 maps | Temic DL501 | 0B5927156F | A02087 | 8K2927156S 0001 | €20 · OpenWith maps €60 |
| 0B5927156F 4G0927156M 0010 Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 4G0927156M 0010 | €20 · Open |
| 0B5927156E 8K1927156AF 0003 Audi S43.0 333hp | Temic DL501 | 0B5927156E | A02087 | 8K1927156AF 0003 | €20 · Open |
| 0B5927156F 8K1927156G 0004 Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8K1927156G 0004 | €20 · Open |
| 0B5927156F 8K1927156G 0004 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02087 | 8K1927156G 0004 | €20 · Open |
| 0B5927156F 8K1927156J 0006 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02087 | 8K1927156J 0006 | €20 · Open |
| 0B5927156F 8K1927156J 0008 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02087 | 8K1927156J 0008 | €20 · Open |
| 0B5927156F 8K1927156M 0004 Audi S43.0 333hp | Temic DL501 GEN2 | 0B5927156F | A02087 | 8K1927156M 0004 | €20 · Open |
| 0B5927156E 8R0927156AC 0003 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156E | A02087 | 8R0927156AC 0003 | €20 · Open |
No file in this list matches. Search all original files →
About A02087
A02087 is on 18 original (stock) ECU files in our catalogue, always as the software number.
They were read from Temic DL501 (12 files), Temic DL501 GEN2 (5 files) and Temic DSG DL501 (1 file) control units.
Our catalogue lists them for the Audi S4 (3.0 333hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (3.0 245hp).
Other numbers on these files: 2 hardware numbers (0B5927156F, 0B5927156E); 18 calibration / SW upgrade numbers (8K1927156G_0004, 8K1927156AA_0006, 8K1927156G_0008, 8K1927156_, …).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- A02087
- Files
- 18
- Found as
- software number
- ECU types
- 3
- Vehicles
- 3
ECU types with A02087 3
Vehicles with A02087 3
Tuning for A02087 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is A02087 listed for?
In our catalogue: Audi S4 (3.0 333hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (3.0 245hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has A02087?
In our catalogue A02087 is on files read from Temic DL501 (12 files), Temic DL501 GEN2 (5 files) and Temic DSG DL501 (1 file) control units.
There are several A02087 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.