Audi A3 Siemens SIMOS10.13 original ECU files
Original (stock) files read from the Siemens SIMOS10.13 control unit of the Audi A3: 7 files, 1 engine version. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
WinOLS map packs for Audi A3: 253 packs from €60
All Audi A3 Siemens SIMOS10.13 files 7
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 03F907309S 2682 Audi A31.2 105hp | Siemens SIMOS10.13 | 03F907309S | 2682 | 03F906070JK 2682 | €20 · Open |
| Audi A31.2 105hp | Siemens SIMOS10.13 | — | — | — | €20 · Open |
| 03F907309T 3632 Audi A31.2 105hp | Siemens SIMOS10.13 | 03F907309T | 3632 | 03F906070GJ 3632 | €20 · Open |
| 03F906070GH 3607 Audi A31.2 105hp | Siemens SIMOS10.13 | — | — | 03F906070GH 3607 | €20 · Open |
| 03F906070GJ 2680 Audi A31.2 105hp · CBZB | Siemens SIMOS10.13 | — | — | 03F906070GJ 2680 | €20 · Open |
| 03F906070GJ 3632 Audi A31.2 105hp | Siemens SIMOS10.13 | 03F906070GJ | 3632 | 03F906070GJ 3632 | €20 · Open |
| 03F906070HD 3612 Audi A31.2 105hp · CBZB | Siemens SIMOS10.13 | — | — | 03F906070HD 3612 | €20 · Open |
No file in this list matches. Search all original files →
Audi A3 Siemens SIMOS10.13: engines and numbers
Engines with the most original files for the Audi A3 Siemens SIMOS10.13, with some of the software and hardware numbers listed:
1.2 105hp (CBZB): 7 files; HW 03F907309S, 03F907309T.
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 3
Calibration / SW upgrade · 5
Other ECU types in the Audi A3 60
Siemens SIMOS10.13 in other vehicles 2
Tuning for Audi A3 Siemens SIMOS10.13 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which engines are listed for the Audi A3 Siemens SIMOS10.13?
1.2 105hp. Pick your engine in the list below and compare HW and SW with your read.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.