Audi A3 Delphi DCM6.2 original ECU files
Original (stock) files read from the Delphi DCM6.2 control unit of the Audi A3: 17 files, 2 engine versions. Find your exact file by its hardware (HW), software (SW) or calibration number and compare it with your own read.
Other ECU types in the Audi A3 60
Delphi DCM6.2 in other vehicles 9
Engine versions 2
All Audi A3 Delphi DCM6.2 files 17
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Audi A31.6 110hp | Delphi DCM6.2 | — | — | 04L906056CR 2508 | €20 · Open |
| Audi A31.6 110hp | Delphi DCM6.2 | 04L906056CR | 2181 | 04L906056CR 2181 | €20 · Open |
| Audi A31.6 110hp | Delphi DCM6.2 | 04L906056D | 2510 | 04L906056D 2510 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056AN | 5733 | 04L906056AN 5733 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | 04L906056AN | 4114 | 04L906056AN 4114 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056QT | 4907 | 04L906056QT 4907 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | — | — | 04L906056HA 5725 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056LF | 4113 | 04L906056LF 4113 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | 04L906056HE | 4118 | 04L906056HE 4118 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | 04L906056HM | 6632 | 04L906056HM 6632 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | — | — | 04L906056GS 4123 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056GT | 5720 | 04L906056GT 5720 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056RA | 5747 | 04L906056RA 5747 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056AP | 5734 | 04L906056AP 5734 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | — | — | 04L906056GS 5723 | €20 · Open |
| Audi A31.6 115hp · CXXB | Delphi DCM6.2 | 04L906056LF | 5735 | 04L906056LF 5735 | €20 · Open |
| Audi A31.6 115hp | Delphi DCM6.2 | 04L906056QS | 4905 | 04L906056QS 4905 | €20 · Open |
All hardware, software and calibration numbers
Find the number from your ECU read (Ctrl+F) and open the matching file.
Hardware (HW) · 11
Calibration / SW upgrade · 17
Tuning for Audi A3 Delphi DCM6.2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Are these files modified?
No. Every file is an original (stock) read of a Audi A3 Delphi DCM6.2 control unit, delivered exactly as read. If you need a modified file, order tuning below.
How do I find the right file?
Read the ECU with your tool and compare the hardware (HW) and software (SW) numbers — and the calibration when several files share one software number. The vehicle name alone is not enough: the identifiers decide.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.
My number is not listed. What now?
Then we do not have this file: every original file we have is listed on this site and found by its search, so we cannot get it for you. Search one number at a time — HW, SW or calibration — exactly as it appears in your read.
Can you tune Audi A3 Delphi DCM6.2?
Yes. We make Stage 1/2 files and DPF, EGR, AdBlue/SCR and DTC solutions for Audi A3 Delphi DCM6.2 (depending on the engine). Upload your read on our file service.