JohnDeere 6105M 4.5TDI — Phoenix L23 — R536269 RE558740 SW62075G
ECU tuning and emission-solution file for this exact calibration · 105hp / 450nm · 2015
About this file
This page covers one exact calibration: Phoenix L23 with software R536269 RE558740 SW62075G, as indexed on the JohnDeere 6105M 4.5TDI. Work is done on your own original read — we do not send a generic file for the controller family, because two vehicles sharing a controller can carry different maps, limiters and diagnostics.
Send the file exactly as your tool saved it and tell us which tool produced it. You get the modified file back in the same format, with the checksum corrected, ready to write. Turnaround is 1–3 hours for the solutions listed as available below.
If your readout shows a different software number from the same family, use the version list at the bottom of the page — every calibration we have indexed has its own page.
Everything on this page is reference information. Not finding your exact version here does not mean we cannot do it — a solution can be developed for any calibration. Create an order on the file service and send us the original read.
What can be done on this ECU
These are the services offered for the Phoenix L23 and their list prices. Ordering several in one file is cheaper — the calculator below applies the bundle rules.
| Service | Price | Notes |
|---|---|---|
| DPF/FAP Delete | 120 € | You need to disconnect plugs from DPF dosing module. Picture with instruction above |
| EGR/AGR Removal | 95 € | |
| SCR/AdBlue OFF | 240 € | Please disconnect AdBlue ecu! If your model not have additional AdBlue ECU then you need to keep connected pump and disconnect only adblue injector |
| Stage 1 tuning file | 140 € | Please visit our website tuning catalog to see final results after Stage 1: https://auto-remap.com/catalog/agriculture |
| DTC's selectivity OFF | 50 € | |
| Checksumm correction | 80 € | Checksumm correction: select this option ONLY if you really need checksumm and your device not do it automatically, because this option cost additional money! |
| Back to ORIGINAL file (restore file to original) | 70 € | Please select this option only if you really need to recovery all changes to original. In case if your attached file after our checking content original changes, order will be completed and the cost of the checking will be deducted from your account!!! Because we are loosing time on checking and comparing it with original database= this is same like price return to original. |
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
Price calculator
Ordering runs through the file service and needs an account. Quote this software number in the order: R536269 RE558740 SW62075G
Prices on this page are for information. The exact price is confirmed inside the order on the file service, after we see your file.
How it works
- Read the ECU with your tool and save the original file.
- Find your software number on this page and check the price in the calculator above. Nothing is uploaded here and no account is needed at this step.
- Register on the file service and open New order.
- Upload the original file there and pick the same solutions you priced on this page.
- We modify the file and correct the checksum.
- Download the finished file on the order page within 1–3 hours, then write it back and clear the codes.
Vehicles running this calibration
| Make | Model | Engine | Power | Year |
|---|---|---|---|---|
| JohnDeere | 6105M | 4.5TDI | 105hp / 450nm | 2015 |
Identifiers on this file
The source data lists these numbers as a single field without marking which is software and which is hardware. The count below shows how often each number appears across the whole database: a number unique to this file is the calibration itself, a number shared by hundreds of files sits at hardware or bootloader level.
| R536269 | unique to this file — the calibration itself |
|---|---|
| RE558740 | unique to this file — the calibration itself |
| SW62075G | shared with 2 other files |
Specifications
| Make | JohnDeere |
|---|---|
| Model | 6105M |
| Engine | 4.5TDI |
| Power | 105hp / 450nm |
| ECU | Phoenix L23 |
| SW / HW identifiers | R536269 RE558740 SW62075G |
| Model years | 2015 |
| Vehicles indexed | 1 |
| Accepted formats | .bin, .hpt, .ctz, .ols and other tool outputs — returned in the same format |
| Turnaround | 1–3 hours |
Other software versions on Phoenix L23
Related reading
What you see here is only a part of the software versions we have already worked on. Any modification can be made for any version, make or model, including ones not in this list — find your make and controller on the site, and if your version is not there, send us the original file. We check it and add it to the list shortly.
FAQ
- My software number is RE558740 — is this the right page?
- Yes. This page is built around the identifier set R536269 RE558740 SW62075G on the Phoenix L23. If your readout shows a different number from the same family, open it from the version list on this page.
- Which file do you need from me?
- The original read from the ECU, in whatever format your tool produced. Tell us the tool so the file comes back in a format you can write.
- How long does it take?
- 1–3 hours for the solutions marked available on this page. Anything marked on request is answered after we look at the file.
- Is the checksum corrected?
- Yes. The returned file is ready to write back.
- Can several solutions go into one file?
- Yes, and that is the cheaper route — the calculator applies the bundle pricing automatically as you tick them.