Motorola EMD1 — tuning files by software version
4 indexed software versions · 4 vehicles · 2 makes
Motorola EMD1 — Scania EMS EMD1 on Scania and Ploeger
This page lists the Scania EMS EMD1 controller under the spelling “Motorola EMD1”, as it is written in the source database: 4 software versions from 2017 to 2020 — Scania R580, Ploeger EPD540, Scania S520, Scania R500, with the 16.4 L, 9.3 L and 12.7 L.
EMD1 is the Scania controller generation after EMS S8, on Euro 6 trucks from 2018 with a DOC/DPF on top of EGR and SCR — the DC09, DC13 and DC16. The solution is a full delete — EGR, SCR/AdBlue and DOC/DPF — modified by hand in WinOLS. For AdBlue/SCR off the AdBlue pump module does not have to be removed; if the DOC/DPF is removed, the pump module has to be removed and disconnected as well.
Every software version below has its own page with the vehicle it belongs to, the solutions available for that exact file and a price calculator. Read the ECU, find your number, open the page.
| Software ID | Vehicle | Engine | Years |
|---|---|---|---|
| 2428093 2866742 2814973 DC16106 | Scania R580 | 16.4TDI | 2017 |
| 2428086 2981221 3012674 DC09313A | Ploeger EPD540 | 9.3TDI | 2020 |
| 2277671 3188277 3179391 DC16116 | Scania S520 | 16.4TDI | 2019 |
| 2428092 3262379 3286865 DC13155 | Scania R500 | 12.7TDI | 2019 |
Questions about Motorola EMD1
Do I need to remove the AdBlue pump?
For AdBlue/SCR off the AdBlue pump module does not have to be removed. If the DOC/DPF is removed, the AdBlue pump module has to be removed and disconnected as well.
Can I remove only the DPF and keep AdBlue?
We do not recommend it: the NOx sensor sees the emissions and the SCR side faults. AdBlue can be removed on its own while the DPF stays in service.
How is this spelling priced?
The same as Motorola EMS EMD1 — it is the same controller written differently.
Related reading
What you see here is only a part of the software versions we have already worked on. Any modification can be made for any version, make or model, including ones not in this list — find your make and controller on the site, and if your version is not there, send us the original file. We check it and add it to the list shortly.