UCE39C82 original ECU files
4 original (stock) ECU files with the part number UCE39C82 — Delphi DCM3.7, used in Ssangyong vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All UCE39C82 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| D20DTR UCE39C00 Ssangyong Actyon2.0 CRDI 175hp | Delphi DCM3.7 | — | UCE39C00 | UCE39C82 D20DTR Q150AT6 | €20 · Open |
| D20DTR Q150MT6 Ssangyong Actyon2.0 CRDI 175hp | Delphi DCM3.7 | — | UCE39C00 | UCE39C82 D20DTR Q150MT6 | €20 · Open |
| D20DTR Q150AT6 Ssangyong Korando2.0 150hp | Delphi DCM3.7 | — | UCE39C00 | UCE39C82 D20DTR Q150AT6 | €20 · Open |
| D20DTR UCE39C00 Ssangyong Korando2.0 150hp | Delphi DCM3.7 | — | UCE39C00 | UCE39C82 D20DTR Q150MT6 | €20 · Open |
No file in this list matches. Search all original files →
About UCE39C82
UCE39C82 is on 4 original (stock) ECU files in our catalogue: as the SW upgrade number on 4 files and as the calibration on 3 files.
They were read from Delphi DCM3.7 (4 files) control units.
Our catalogue lists them for the Ssangyong Actyon (2.0 CRDI 175hp) and Ssangyong Korando (2.0 150hp).
Other numbers on these files: 1 software number (UCE39C00).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- UCE39C82
- Files
- 4
- Found as
- SW upgrade number and calibration
- ECU types
- 1
- Vehicles
- 2
ECU types with UCE39C82 1
Vehicles with UCE39C82 2
Tuning for Delphi DCM3.7 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is UCE39C82 listed for?
In our catalogue: Ssangyong Actyon (2.0 CRDI 175hp) and Ssangyong Korando (2.0 150hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has UCE39C82?
In our catalogue UCE39C82 is on files read from Delphi DCM3.7 (4 files) control units.
There are several UCE39C82 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.