Hardware number · 4 files

BTMV4D-0300 original ECU files

4 original (stock) ECU files with the hardware number BTMV4D-0300 — Eldor EM2.0, used in MV Agusta vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

4files
1ECU types
3models
1makes

All BTMV4D-0300 files 4

VehicleECUHWSWCalibration / upgrade
M3M34R-0512 MV Agusta Brutale 8000.8 130hp Eldor EM2.0 BTMV4D-0300 M3M34R-0512 — €20 · Open
M3M34R-0516 MV Agusta Brutale 8000.8 130hp Eldor EM2.0 BTMV4D-0300 M3M34R-0516 — €20 · Open
M3M34R-0511 MV Agusta F3 6750.7 128hp Eldor EM2.0 M3M34R-0511 BTMV4D-0300 — €20 · Open
M3M34R-0515 MV Agusta F3 8000.8 106hp Eldor EM2.0 BTMV4D-0300 M3M34R-0515 0515TA25 €20 · Open

About BTMV4D-0300

BTMV4D-0300 is on 4 original (stock) ECU files in our catalogue: as the hardware number on 3 files and as the software number on 1 file.

They were read from Eldor EM2.0 (4 files) control units.

Our catalogue lists them for the MV Agusta Brutale 800 (0.8 130hp), MV Agusta F3 675 (0.7 128hp) and MV Agusta F3 800 (0.8 106hp).

Other numbers on these files: 1 hardware number (M3M34R-0511), listed on 1 of the 4 files; 3 software numbers (M3M34R-0512, M3M34R-0516, M3M34R-0515), listed on 3 of the 4 files; 1 calibration / SW upgrade number (0515TA25), listed on 1 of the 4 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
BTMV4D-0300
Files
4
Found as
hardware number and software number
ECU types
1
Vehicles
3
Also written as
BTMV4D0300 · BTMV4D 0300

ECU types with BTMV4D-0300 1

Vehicles with BTMV4D-0300 3

More Eldor EM2.0 numbers 3

Need a modified file?

Tuning for Eldor EM2.0 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is BTMV4D-0300 listed for?

In our catalogue: MV Agusta Brutale 800 (0.8 130hp), MV Agusta F3 675 (0.7 128hp) and MV Agusta F3 800 (0.8 106hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has BTMV4D-0300?

In our catalogue BTMV4D-0300 is on files read from Eldor EM2.0 (4 files) control units.

There are several BTMV4D-0300 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.