Software number · 4 files

98318232 original ECU files

4 original (stock) ECU files with the software number 98318232 — Transtron SH72533_M4S/L4S, used in Isuzu vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

4files
1ECU types
1models
1makes

All 98318232 files 4

VehicleECUHWSWCalibration / upgrade
TTI 0100 Isuzu D-MAX3.0 170hp Transtron SH72533_M4S/L4S TTI 0100 98318232 — €20 · Open
98305363 Isuzu D-MAX3.0 170hp · 4JJ1 Transtron SH72533_M4S/L4S 98305363 98318232 98305363 €20 · Open
Isuzu D-MAX3.0 170hp · 4JJ1 Transtron SH72533_M4S/L4S 98318232 98318232 98318232 €20 · Open
98341284 Isuzu D-MAX3.0 170hp · 4JJ1 Transtron SH72533_M4S/L4S 98341284 98318232 98341284 €20 · Open

About 98318232

98318232 is on 4 original (stock) ECU files in our catalogue: as the software number on 4 files, as the calibration on 1 file, as the SW upgrade number on 1 file and as the hardware number on 1 file.

They were read from Transtron SH72533_M4S/L4S (4 files) control units.

Our catalogue lists them for the Isuzu D-MAX (3.0 170hp).

Other numbers on these files: 3 hardware numbers (TTI 0100, 98305363, 98341284), listed on 3 of the 4 files; 2 calibration / SW upgrade numbers (98305363, 98341284), listed on 2 of the 4 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
98318232
Files
4
Found as
software number, calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
1

ECU types with 98318232 1

Vehicles with 98318232 1

Need a modified file?

Tuning for Transtron SH72533_M4S/L4S — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 98318232 listed for?

In our catalogue: Isuzu D-MAX (3.0 170hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 98318232?

In our catalogue 98318232 is on files read from Transtron SH72533_M4S/L4S (4 files) control units.

There are several 98318232 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.