Software number · 5 files

98041204 original ECU files

5 original (stock) ECU files with the software number 98041204 — Transtron SH7058_M11, used in Isuzu vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

5files
1ECU types
2models
1makes

All 98041204 files 5

VehicleECUHWSWCalibration / upgrade
Isuzu N-SERIES5.2 150hp · 4HK1 Transtron SH7058_M11 — 98041204 98041204 €20 · Open
Isuzu Torquoise5.2 190hp · 4HK1Map pack · 24 maps Transtron SH7058_M11 — 98041204 — €20 · OpenWith maps €60
Isuzu Torquoise5.2 190hp · 4HK1E4CMap pack · 24 maps Transtron SH7058_M11 98041204 98041204 98041204 €20 · OpenWith maps €60
98041209 Isuzu Torquoise5.2 190hp · 4HK1E4C Transtron SH7058_M11 98041209 98041204 98041209 €20 · Open
98071296 Isuzu Torquoise5.2 190hp · 4HK1E4N Transtron SH7058_M11 98071296 98041204 98071296 €20 · Open

About 98041204

98041204 is on 5 original (stock) ECU files in our catalogue: as the software number on 5 files, as the calibration on 2 files, as the SW upgrade number on 2 files and as the hardware number on 1 file.

They were read from Transtron SH7058_M11 (5 files) control units.

Our catalogue lists them for the Isuzu Torquoise (5.2 190hp) and Isuzu N-SERIES (5.2 150hp).

Other numbers on these files: 2 hardware numbers (98041209, 98071296), listed on 2 of the 5 files; 2 calibration / SW upgrade numbers (98041209, 98071296), listed on 2 of the 5 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
98041204
Files
5
Found as
software number, calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2

ECU types with 98041204 1

Vehicles with 98041204 2

Need a modified file?

Tuning for Transtron SH7058_M11 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 98041204 listed for?

In our catalogue: Isuzu Torquoise (5.2 190hp) and Isuzu N-SERIES (5.2 150hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 98041204?

In our catalogue 98041204 is on files read from Transtron SH7058_M11 (5 files) control units.

There are several 98041204 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.