95B90652313 original ECU files
2 original (stock) ECU files with the hardware number 95B90652313 — Continental SDI10.2, used in Porsche vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 95B90652313 files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| W08B106844M12 Porsche Macan3.0 340hp | Continental SDI10.2 | 95B90652313 | W08B106844M12 | 95B90652313 W08B106844M12 3277 | €20 · Open |
| W08B206844M06 Porsche Macan3.0 340hp | Continental SDI10.2 | 95B90652313 | W08B206844M06 | 95B90652313 W08B206844M06 3488 | €20 · Open |
No file in this list matches. Search all original files →
About 95B90652313
95B90652313 is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files and as the hardware number on 2 files.
They were read from Continental SDI10.2 (2 files) control units.
Our catalogue lists them for the Porsche Macan (3.0 340hp).
Other numbers on these files: 2 software numbers (W08B106844M12, W08B206844M06).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 95B90652313
- Files
- 2
- Found as
- calibration and hardware number
- ECU types
- 1
- Vehicles
- 1
ECU types with 95B90652313 1
Vehicles with 95B90652313 1
Tuning for Continental SDI10.2 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 95B90652313 listed for?
In our catalogue: Porsche Macan (3.0 340hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 95B90652313?
In our catalogue 95B90652313 is on files read from Continental SDI10.2 (2 files) control units.
There are several 95B90652313 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.