8W0906259P original ECU files
4 original (stock) ECU files with the hardware number 8W0906259P — Siemens SIMOS 18.4, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8W0906259P files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8W0906259P 0001 Audi Q52.0 252hp | Siemens SIMOS 18.4 | — | — | 8W0906259P 0001 | €20 · Open |
| 8W0906259P 0002 Audi Q52.0 252hp | Siemens SIMOS 18.4 | — | — | 8W0906259P 0002 | €20 · Open |
| 8W0906259P 0001 Audi Q52.0 252hp | Siemens SIMOS 18.4 | 8W0906259P | 0001 | 8W0906259P 0001 | €20 · Open |
| 8W0906259P 0003 Audi Q52.0 252hp | Siemens SIMOS 18.4 | 8W0906259P | 0003 | 8W0906259P 0003 | €20 · Open |
No file in this list matches. Search all original files →
About 8W0906259P
8W0906259P is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 4 files and as the hardware number on 2 files.
They were read from Siemens SIMOS 18.4 (4 files) control units.
Our catalogue lists them for the Audi Q5 (2.0 252hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8W0906259P
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 8W0 906 259 P
ECU types with 8W0906259P 1
Vehicles with 8W0906259P 1
Tuning for Siemens SIMOS 18.4 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8W0906259P listed for?
In our catalogue: Audi Q5 (2.0 252hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8W0906259P?
In our catalogue 8W0906259P is on files read from Siemens SIMOS 18.4 (4 files) control units.
There are several 8W0906259P files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.