8P7907115G original ECU files
4 original (stock) ECU files with the part number 8P7907115G — Bosch MED17, Bosch MED17.5, used in Audi, Skoda vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8P7907115G files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8P7907115G 0030 Audi A31.8 160hp · A5.0.6 | Bosch MED17.5 | — | — | 8P7907115G 0030 | €20 · Open |
| 0261S04315 1037400847 Audi A31.8 16v TFSI 160hp · A5.0.6 | Bosch MED17 | 0261S04315 | 1037400847 | 8P7907115G 0050 | €20 · Open |
| 0261S04315 1037393282 Audi A51.8 16v TFSI 160hp · A5.0.6 | Bosch MED17 | 0261S04315 | 1037393282 | 8P7907115G 0020 | €20 · Open |
| 8P7907115G 0040 Skoda Octavia1.8 16v TSI 160hp · A5.0.6Map pack · 84 maps | Bosch MED17.5 | — | — | 8P7907115G 0040 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 8P7907115G
8P7907115G is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files and as the SW upgrade number on 2 files.
They were read from Bosch MED17.5 (2 files) and Bosch MED17 (2 files) control units.
Our catalogue lists them for the Audi A3 (1.8 16v TFSI 160hp), Audi A5 (1.8 16v TFSI 160hp) and Skoda Octavia (1.8 16v TSI 160hp).
Other numbers on these files: 1 hardware number (0261S04315), listed on 2 of the 4 files; 2 software numbers (1037400847, 1037393282), listed on 2 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8P7907115G
- Files
- 4
- Found as
- calibration and SW upgrade number
- ECU types
- 2
- Vehicles
- 3
- Also written as
- 8P7 907 115 G
ECU types with 8P7907115G 2
Vehicles with 8P7907115G 3
More Bosch MED17 numbers 18
Tuning for 8P7907115G — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8P7907115G listed for?
In our catalogue: Audi A3 (1.8 16v TFSI 160hp), Audi A5 (1.8 16v TFSI 160hp) and Skoda Octavia (1.8 16v TSI 160hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8P7907115G?
In our catalogue 8P7907115G is on files read from Bosch MED17.5 (2 files) and Bosch MED17 (2 files) control units.
There are several 8P7907115G files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.