8K2907115S original ECU files
4 original (stock) ECU files with the part number 8K2907115S — Bosch MED17.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8K2907115S files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8K2907115S 0003 Audi A42.0 16v TFSI 180hp · CDNB | Bosch MED17.1 | — | — | 8K2907115S 0003 | €20 · Open |
| 8K2907115S 0004 Audi A42.0 16v TFSI 180hp · CDNBMap pack · 177 maps | Bosch MED17.1 | — | — | 8K2907115S 0004 | €20 · OpenWith maps €60 |
| 8K2907115S 0005 Audi A42.0 211hp · CDNB | Bosch MED17.1 | — | — | 8K2907115S 0005 | €20 · Open |
| 8K2907115S 0002 Audi A52.0 180hp · CDNB | Bosch MED17.1 | — | — | 8K2907115S 0002 | €20 · Open |
No file in this list matches. Search all original files →
About 8K2907115S
8K2907115S is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files and as the SW upgrade number on 3 files.
They were read from Bosch MED17.1 (4 files) control units.
Our catalogue lists them for the Audi A4 (2.0 16v TFSI 180hp, 2.0 211hp) and Audi A5 (2.0 180hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8K2907115S
- Files
- 4
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 8K2 907 115 S
ECU types with 8K2907115S 1
Vehicles with 8K2907115S 2
More Bosch MED17.1 numbers 24
Tuning for Bosch MED17.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8K2907115S listed for?
In our catalogue: Audi A4 (2.0 16v TFSI 180hp, 2.0 211hp) and Audi A5 (2.0 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8K2907115S?
In our catalogue 8K2907115S is on files read from Bosch MED17.1 (4 files) control units.
There are several 8K2907115S files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.