8K1927156J original ECU files
6 original (stock) ECU files with the part number 8K1927156J — Temic DL501, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 8K1927156J files 6
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 8K1927156J 0010 Audi A5 Sportback2.0 211hp | Temic DL501 | — | — | 8K1927156J 0010 | €20 · Open |
| 0B5927156E A02203 Audi A62.0 211hpMap pack · 133 maps | Temic DL501 | 0B5927156E | A02203 | 8K1927156J 0013 | €20 · OpenWith maps €60 |
| 8K1927156J 0006 Audi S43.0 333hp | Temic DL501 | — | — | 8K1927156J 0006 | €20 · Open |
| 0B5927156F A02051 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02051 | 8K1927156J 0006 | €20 · Open |
| 0B5927156F A02087 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02087 | 8K1927156J 0006 | €20 · Open |
| 0B5927156F A02087 Audi S43.0 333hp · CEPA | Temic DL501 | 0B5927156F | A02087 | 8K1927156J 0008 | €20 · Open |
No file in this list matches. Search all original files →
About 8K1927156J
8K1927156J is on 6 original (stock) ECU files in our catalogue: as the calibration on 6 files and as the SW upgrade number on 4 files.
They were read from Temic DL501 (6 files) control units.
Our catalogue lists them for the Audi S4 (3.0 333hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (2.0 211hp).
Other numbers on these files: 2 hardware numbers (0B5927156F, 0B5927156E), listed on 4 of the 6 files; 3 software numbers (A02087, A02203, A02051), listed on 4 of the 6 files; 1 calibration / SW upgrade number (8K1927156A_0004), listed on 1 of the 6 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 8K1927156J
- Files
- 6
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 3
- Also written as
- 8K1 927 156 J
ECU types with 8K1927156J 1
Vehicles with 8K1927156J 3
Tuning for Temic DL501 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 8K1927156J listed for?
In our catalogue: Audi S4 (3.0 333hp), Audi A5 Sportback (2.0 211hp) and Audi A6 (2.0 211hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 8K1927156J?
In our catalogue 8K1927156J is on files read from Temic DL501 (6 files) control units.
There are several 8K1927156J files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.