Hardware number · 8 files

8K1907401A original ECU files

8 original (stock) ECU files with the hardware number 8K1907401A — Bosch EDC17CP14, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

8files
1ECU types
2models
1makes

All 8K1907401A files 8

VehicleECUHWSWCalibration / upgrade
8K1907401A 0008 Audi A42.7 190hp · CGKA Bosch EDC17CP14 8K1907401A 0008 8K1907401A 0008 €20 · Open
8K1907401A 0005 Audi A42.7 TDI V6 190hp · CGKA Bosch EDC17CP14 8K1907401A 0005 8K1907401A 0005 €20 · Open
8K1907401A 0003 Audi A43.0 239hp · CGKA Bosch EDC17CP14 — — 8K1907401A 0003 €20 · Open
8K1907401A 0002 Audi A52.7 190hp · CGKA Bosch EDC17CP14 8K1907401A 0002 8K1907401A 0002 €20 · Open
8K1907401A 0003 Audi A52.7 190hp · CGKA Bosch EDC17CP14 8K1907401A 0003 8K1907401A 0003 €20 · Open
8K1907401A 0004 Audi A52.7 TDI V6 190hp · CGKA Bosch EDC17CP14 8K1907401A 0004 8K1907401A 0004 €20 · Open
8K1907401A 0006 Audi A53.0 240hp · CGKA Bosch EDC17CP14 8K1907401A 0006 8K1907401A 0006 €20 · Open
8K1907401A 0008 Audi A53.0 240hp · CGKA Bosch EDC17CP14 8K1907401A 0008 8K1907401A 0008 €20 · Open

About 8K1907401A

8K1907401A is on 8 original (stock) ECU files in our catalogue: as the calibration on 8 files, as the SW upgrade number on 8 files and as the hardware number on 7 files.

They were read from Bosch EDC17CP14 (8 files) control units.

Our catalogue lists them for the Audi A5 (2.7 TDI V6 190hp, 3.0 240hp) and Audi A4 (2.7 TDI V6 190hp, 3.0 239hp).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
8K1907401A
Files
8
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
8K1 907 401 A

ECU types with 8K1907401A 1

Vehicles with 8K1907401A 2

Need a modified file?

Tuning for Bosch EDC17CP14 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 8K1907401A listed for?

In our catalogue: Audi A5 (2.7 TDI V6 190hp, 3.0 240hp) and Audi A4 (2.7 TDI V6 190hp, 3.0 239hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 8K1907401A?

In our catalogue 8K1907401A is on files read from Bosch EDC17CP14 (8 files) control units.

There are several 8K1907401A files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.