89663-E3581 original ECU files
7 original (stock) ECU files with the software number 89663-E3581 — Denso 89663-37571B, used in Hino vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 89663-E3581 files 7
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | — | €20 · Open |
| Hino 300 Series4.0 170hpMap pack · 18 maps | Denso 89663-37571B | — | 89663-E3581 | — | €20 · OpenWith maps €90 |
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | — | €20 · Open |
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | — | €20 · Open |
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | 3E358100 | €20 · Open |
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | 3E358100 | €20 · Open |
| Hino 300 Series4.0 170hp | Denso 89663-37571B | — | 89663-E3581 | 3E358100 | €20 · Open |
No file in this list matches. Search all original files →
About 89663-E3581
89663-E3581 is on 7 original (stock) ECU files in our catalogue, always as the software number.
They were read from Denso control units.
Our catalogue lists them for the Hino 300 Series (4.0 170hp).
Other numbers on these files: 1 calibration / SW upgrade number (3E358100), listed on 3 of the 7 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 7 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 89663-E3581
- Files
- 7
- Found as
- software number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 89663E3581 · 89663 E3581
ECU types with 89663-E3581 1
Vehicles with 89663-E3581 1
Tuning for Denso 89663-37571B — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 89663-E3581 listed for?
In our catalogue: Hino 300 Series (4.0 170hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 89663-E3581?
In our catalogue 89663-E3581 is on files read from Denso control units.
There are several 89663-E3581 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.