820110965 original ECU files
4 original (stock) ECU files with the hardware number 820110965 — Siemens SIM32, used in Renault vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 820110965 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Renault Twingo II1.2 100hp | Siemens SIM32 | 820110965 | — | — | €20 · Open |
| Renault Twingo II1.2 100hp | Siemens SIM32 | 820110965 | — | — | €20 · Open |
| Renault Twingo II1.2 100hp | Siemens SIM32 | 820110965 | — | — | €20 · Open |
| Renault Twingo II1.2 100hp | Siemens SIM32 | 820110965 | — | — | €20 · Open |
No file in this list matches. Search all original files →
About 820110965
820110965 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Siemens SIM32 (4 files) control units.
Our catalogue lists them for the Renault Twingo II (1.2 100hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 4 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 820110965
- Files
- 4
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 820 110 965
ECU types with 820110965 1
Vehicles with 820110965 1
Tuning for Siemens SIM32 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 820110965 listed for?
In our catalogue: Renault Twingo II (1.2 100hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 820110965?
In our catalogue 820110965 is on files read from Siemens SIM32 (4 files) control units.
There are several 820110965 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.