7MFK38NF4 original ECU files
4 original (stock) ECU files with the hardware number 7MFK38NF4 — Hitachi MEC100, used in Nissan vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 7MFK38NF4 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 1EV16B Nissan 3503.5 313hp · KAWNE | Hitachi MEC100 | 7MFK38NF4 | — | 1EV16B | €20 · Open |
| 1EV18B Nissan 3503.5 313hp | Hitachi MEC100 | 7MFK38NF4 | — | 1EV18B | €20 · Open |
| 1EV12C Nissan 350Z3.5 313hp | Hitachi MEC100 | 7MFK38NF4 | — | 1EV12C | €20 · Open |
| 1EV16B Nissan 350Z3.5 313hp | Hitachi MEC100 | 7MFK38NF4 | — | 1EV16B | €20 · Open |
No file in this list matches. Search all original files →
About 7MFK38NF4
7MFK38NF4 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Hitachi MEC100 (4 files) control units.
Our catalogue lists them for the Nissan 350 (3.5 313hp) and Nissan 350Z (3.5 313hp).
Other numbers on these files: 3 calibration / SW upgrade numbers (1EV16B, 1EV18B, 1EV12C).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 7MFK38NF4
- Files
- 4
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 2
ECU types with 7MFK38NF4 1
Vehicles with 7MFK38NF4 2
Tuning for Hitachi MEC100 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 7MFK38NF4 listed for?
In our catalogue: Nissan 350 (3.5 313hp) and Nissan 350Z (3.5 313hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 7MFK38NF4?
In our catalogue 7MFK38NF4 is on files read from Hitachi MEC100 (4 files) control units.
There are several 7MFK38NF4 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.