Hardware number · 7 files

4H0907557 original ECU files

7 original (stock) ECU files with the hardware number 4H0907557 — Bosch MED17.1.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

7files
1ECU types
2models
1makes

All 4H0907557 files 7

VehicleECUHWSWCalibration / upgrade
4H0907557 0008 Audi S64.0 420hp · CGTA Bosch MED17.1.1 — — 4H0907557 0008 €20 · Open
4H0907557 0006 Audi S64.0 420hp · CGTA Bosch MED17.1.1 4H0907557 0006 4H0907557 0006 €20 · Open
4H0907557 0007 Audi S64.0 420hp · CGTA Bosch MED17.1.1 4H0907557 0007 4H0907557 0007 €20 · Open
4H0907557 0009 Audi S64.0 420hp · CGTA Bosch MED17.1.1 4H0907557 0009 4H0907557 0009 €20 · Open
4H0907557 0010 Audi S64.0 420hp · CGTAMap pack · 193 maps Bosch MED17.1.1 4H0907557 0010 4H0907557 0010 €20 · OpenWith maps €60
4H0907557 0004 Audi S84.0 518hp · CGTA Bosch MED17.1.1 — — 4H0907557 0004 €20 · Open
4H0907557 0001 Audi S84.0 518hp · CGTA Bosch MED17.1.1 4H0907557 0001 4H0907557 0001 €20 · Open

About 4H0907557

4H0907557 is on 7 original (stock) ECU files in our catalogue: as the calibration on 7 files, as the SW upgrade number on 7 files and as the hardware number on 5 files.

They were read from Bosch MED17.1.1 (7 files) control units.

Our catalogue lists them for the Audi S6 (4.0 420hp) and Audi S8 (4.0 518hp).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
4H0907557
Files
7
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
4H0 907 557

ECU types with 4H0907557 1

Vehicles with 4H0907557 2

Need a modified file?

Tuning for Bosch MED17.1.1 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 4H0907557 listed for?

In our catalogue: Audi S6 (4.0 420hp) and Audi S8 (4.0 518hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 4H0907557?

In our catalogue 4H0907557 is on files read from Bosch MED17.1.1 (7 files) control units.

There are several 4H0907557 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.