Part number · 9 files

4H0907401 original ECU files

9 original (stock) ECU files with the part number 4H0907401 — Bosch EDC17CP44, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

9files
1ECU types
2models
1makes

All 4H0907401 files 9

VehicleECUHWSWCalibration / upgrade
4H0907401 0008 Audi A63.0 TDI 204hp · CDTAMap pack · 138 maps Bosch EDC17CP44 — — 4H0907401 0008 €20 · OpenWith maps €60
4H0907401 0007 Audi A8258 245hp · CDTA Bosch EDC17CP44 — 1037521649 4H0907401 0007 €20 · Open
4H0907401 0009 Audi A83.0 245hp · CDTAMap pack · 79 maps Bosch EDC17CP44 — — 4H0907401 0009 €20 · OpenWith maps €60
4H0907401 0006 Audi A83.0 250hp · CDTAMap pack · 79 maps Bosch EDC17CP44 — — 4H0907401 0006 €20 · OpenWith maps €60
4H0907401 Z006 Audi A83.0 250hp · CDTA Bosch EDC17CP44 — — 4H0907401 Z006 €20 · Open
4H0907401 0001 Audi A83.0 250hp · CDTA Bosch EDC17CP44 4H0907401 0001 4H0907401 0001 €20 · Open
4H0907401 0005 Audi A83.0 250hp · CDTA Bosch EDC17CP44 — 1037518081 4H0907401 0005 €20 · Open
4H0907401 0003 Audi A83.0 TDI V6 250hp · CDTAMap pack · 134 maps Bosch EDC17CP44 — 1037510955 4H0907401 0003 €20 · OpenWith maps €60
0281016690 1037511950 Audi A83.0 TDI V6 250hp · CDTAMap pack · 129 maps Bosch EDC17CP44 0281016690 1037511950 4H0907401 0004 €20 · OpenWith maps €60

About 4H0907401

4H0907401 is on 9 original (stock) ECU files in our catalogue: as the calibration on 9 files, as the SW upgrade number on 7 files and as the hardware number on 1 file.

They were read from Bosch EDC17CP44 (9 files) control units.

Our catalogue lists them for the Audi A8 (3.0 TDI V6 250hp, 258 245hp, 3.0 245hp) and Audi A6 (3.0 TDI 204hp).

Other numbers on these files: 1 hardware number (0281016690), listed on 1 of the 9 files; 4 software numbers (1037521649, 1037518081, 1037510955, 1037511950), listed on 4 of the 9 files.

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
4H0907401
Files
9
Found as
calibration, SW upgrade number and hardware number
ECU types
1
Vehicles
2
Also written as
4H0 907 401

ECU types with 4H0907401 1

Vehicles with 4H0907401 2

More Bosch EDC17CP44 numbers 24

Need a modified file?

Tuning for Bosch EDC17CP44 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 4H0907401 listed for?

In our catalogue: Audi A8 (3.0 TDI V6 250hp, 258 245hp, 3.0 245hp) and Audi A6 (3.0 TDI 204hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 4H0907401?

In our catalogue 4H0907401 is on files read from Bosch EDC17CP44 (9 files) control units.

There are several 4H0907401 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.