4G2907311E original ECU files
3 original (stock) ECU files with the hardware number 4G2907311E — Bosch EDC17CP54, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4G2907311E files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4G2907311E 0008 Audi A63.0 272hp · CRTE | Bosch EDC17CP54 | — | — | 4G2907311E 0008 | €20 · Open |
| 4G2907311E 0003 Audi A63.0 272hp · CRTE | Bosch EDC17CP54 | 4G2907311E | 0003 | 4G2907311E 0003 | €20 · Open |
| 4G2907311E 0008 Audi A63.0 272hp · CRTE | Bosch EDC17CP54 | 4G2907311E | 0008 | 4G2907311E 0008 | €20 · Open |
No file in this list matches. Search all original files →
About 4G2907311E
4G2907311E is on 3 original (stock) ECU files in our catalogue: as the calibration on 3 files, as the SW upgrade number on 3 files and as the hardware number on 2 files.
They were read from Bosch EDC17CP54 (3 files) control units.
Our catalogue lists them for the Audi A6 (3.0 272hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4G2907311E
- Files
- 3
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 4G2 907 311 E
ECU types with 4G2907311E 1
Vehicles with 4G2907311E 1
Tuning for Bosch EDC17CP54 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4G2907311E listed for?
In our catalogue: Audi A6 (3.0 272hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4G2907311E?
In our catalogue 4G2907311E is on files read from Bosch EDC17CP54 (3 files) control units.
There are several 4G2907311E files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.