4F9910402B original ECU files
4 original (stock) ECU files with the part number 4F9910402B — Bosch EDC17CP14, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4F9910402B files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4F9910402B 0070 Audi A62.7 190hp · CDYBMap pack · 130 maps | Bosch EDC17CP14 | — | — | 4F9910402B 0070 | €20 · OpenWith maps €60 |
| 4F9910402B 0040 Audi A62.7 190hp · CDYB | Bosch EDC17CP14 | 4F9910402B | 0040 | 4F9910402B 0040 | €20 · Open |
| 4F9910402B 0060 Audi A63.0 240hp · CDYB | Bosch EDC17CP14 | 4F9910402B | 0060 | 4F9910402B 0060 | €20 · Open |
| 0281015353 1037505988 Audi A63.0 TDI V6 240hp · CDYB | Bosch EDC17CP14 | 0281015353 | 1037505988 | 4F9910402B 0050 | €20 · Open |
No file in this list matches. Search all original files →
About 4F9910402B
4F9910402B is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 3 files and as the hardware number on 2 files.
They were read from Bosch EDC17CP14 (4 files) control units.
Our catalogue lists them for the Audi A6 (2.7 190hp, 3.0 TDI V6 240hp).
Other numbers on these files: 1 hardware number (0281015353), listed on 1 of the 4 files; 1 software number (1037505988), listed on 1 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4F9910402B
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 4F9 910 402 B
ECU types with 4F9910402B 1
Vehicles with 4F9910402B 1
Tuning for Bosch EDC17CP14 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4F9910402B listed for?
In our catalogue: Audi A6 (2.7 190hp, 3.0 TDI V6 240hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4F9910402B?
In our catalogue 4F9910402B is on files read from Bosch EDC17CP14 (4 files) control units.
There are several 4F9910402B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.