4F2910552A original ECU files
4 original (stock) ECU files with the part number 4F2910552A — Siemens SIMOS 8.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4F2910552A files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4F2910552A 0090 Audi A62.8 220hp | Siemens SIMOS 8.1 | 4F2910552A | 0090 | 4F2910552A 0090 | €20 · Open |
| 4F2910552A 0030 Audi A62800220 250hp | Siemens SIMOS 8.1 | — | — | 4F2910552A 0030 | €20 · Open |
| 4F2910552A 0070 Audi A62800220 250hp | Siemens SIMOS 8.1 | — | — | 4F2910552A 0070 | €20 · Open |
| 6576625725 0080 Audi A62800220 250hp · CALA | Siemens SIMOS 8.1 | 6576625725 | — | 4F2910552A 0080 | €20 · Open |
No file in this list matches. Search all original files →
About 4F2910552A
4F2910552A is on 4 original (stock) ECU files in our catalogue: as the SW upgrade number on 4 files, as the calibration on 4 files and as the hardware number on 1 file.
They were read from Siemens SIMOS 8.1 (4 files) control units.
Our catalogue lists them for the Audi A6 (2800220 250hp, 2.8 220hp).
Other numbers on these files: 1 hardware number (6576625725), listed on 1 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4F2910552A
- Files
- 4
- Found as
- SW upgrade number, calibration and hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 4F2 910 552 A
ECU types with 4F2910552A 1
Vehicles with 4F2910552A 1
More Siemens SIMOS 8.1 numbers 2
Tuning for Siemens SIMOS 8.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4F2910552A listed for?
In our catalogue: Audi A6 (2800220 250hp, 2.8 220hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4F2910552A?
In our catalogue 4F2910552A is on files read from Siemens SIMOS 8.1 (4 files) control units.
There are several 4F2910552A files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.