4F1910401B original ECU files
4 original (stock) ECU files with the part number 4F1910401B — Bosch EDC16CP34, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4F1910401B files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 4F1910401B 0030 Audi A42.7 179hpMap pack · 101 maps | Bosch EDC16CP34 | — | — | 4F1910401B 0030 | €20 · OpenWith maps €60 |
| 4F1910401B 0020 Audi A62.7 179hp | Bosch EDC16CP34 | 4F1910401B | 0020 | 4F1910401B 0020 | €20 · Open |
| 4F1910401B 0060 Audi A62.7 180hp | Bosch EDC16CP34 | — | — | 4F1910401B 0060 | €20 · Open |
| 4F1910401B 0050 Audi A62.7 180hp | Bosch EDC16CP34 | 4F1910401B | 0050 | 4F1910401B 0050 | €20 · Open |
No file in this list matches. Search all original files →
About 4F1910401B
4F1910401B is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files, as the SW upgrade number on 4 files and as the hardware number on 2 files.
They were read from Bosch EDC16CP34 (4 files) control units.
Our catalogue lists them for the Audi A6 (2.7 180hp, 2.7 179hp) and Audi A4 (2.7 179hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4F1910401B
- Files
- 4
- Found as
- calibration, SW upgrade number and hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 4F1 910 401 B
ECU types with 4F1910401B 1
Vehicles with 4F1910401B 2
Tuning for Bosch EDC16CP34 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4F1910401B listed for?
In our catalogue: Audi A6 (2.7 180hp, 2.7 179hp) and Audi A4 (2.7 179hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4F1910401B?
In our catalogue 4F1910401B is on files read from Bosch EDC16CP34 (4 files) control units.
There are several 4F1910401B files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.