4F0910560 original ECU files
2 original (stock) ECU files with the part number 4F0910560 — Bosch ME7.1.1, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4F0910560 files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0261208363 1037370690 Audi A64.2 300hp | Bosch ME7.1.1 | 0261208363 | 1037370690 | 4F0910560 0030 | €20 · Open |
| 0261208363 1037371177 Audi S64.2 326hp | Bosch ME7.1.1 | 0261208363 | 1037371177 | 4F0910560 0050 | €20 · Open |
No file in this list matches. Search all original files →
About 4F0910560
4F0910560 is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files and as the SW upgrade number on 2 files.
They were read from Bosch ME7.1.1 (2 files) control units.
Our catalogue lists them for the Audi A6 (4.2 300hp) and Audi S6 (4.2 326hp).
Other numbers on these files: 1 hardware number (0261208363); 2 software numbers (1037370690, 1037371177).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4F0910560
- Files
- 2
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 4F0 910 560
ECU types with 4F0910560 1
Vehicles with 4F0910560 2
Tuning for Bosch ME7.1.1 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4F0910560 listed for?
In our catalogue: Audi A6 (4.2 300hp) and Audi S6 (4.2 326hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4F0910560?
In our catalogue 4F0910560 is on files read from Bosch ME7.1.1 (2 files) control units.
There are several 4F0910560 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.