4B2907401J original ECU files
4 original (stock) ECU files with the hardware number 4B2907401J — Bosch EDC15P, Bosch EDC15VM, used in Audi vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4B2907401J files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 0281010822 1037363777 Audi A62.5 180hp | Bosch EDC15VM | 0281010822 | 1037363777 | 4B2907401J D07 | €20 · Open |
| 4B2907401J 14 Audi A62.5 180hp | Bosch EDC15P | 4B2907401J | 14 | 4B2907401J 14 | €20 · Open |
| 4B2907401J D05 Audi A62.5 TDI V6 180hpMap pack · 52 maps | Bosch EDC15VM | — | — | 4B2907401J D05 | €20 · OpenWith maps €60 |
| 4B2907401J 06 Audi A62.5 TDI V6 180hpMap pack · 46 maps | Bosch EDC15P | 4B2907401J | 06 | 4B2907401J 06 | €20 · OpenWith maps €60 |
No file in this list matches. Search all original files →
About 4B2907401J
4B2907401J is on 4 original (stock) ECU files in our catalogue: as the calibration on 4 files and as the hardware number on 2 files.
They were read from Bosch EDC15VM (2 files) and Bosch EDC15P (2 files) control units.
Our catalogue lists them for the Audi A6 (2.5 TDI V6 180hp).
Other numbers on these files: 1 hardware number (0281010822), listed on 1 of the 4 files; 1 software number (1037363777), listed on 1 of the 4 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4B2907401J
- Files
- 4
- Found as
- calibration and hardware number
- ECU types
- 2
- Vehicles
- 1
- Also written as
- 4B2 907 401 J
ECU types with 4B2907401J 2
Vehicles with 4B2907401J 1
Tuning for 4B2907401J — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4B2907401J listed for?
In our catalogue: Audi A6 (2.5 TDI V6 180hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4B2907401J?
In our catalogue 4B2907401J is on files read from Bosch EDC15VM (2 files) and Bosch EDC15P (2 files) control units.
There are several 4B2907401J files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.