4817RT0013328R original ECU files
2 original (stock) ECU files with the hardware number 4817RT0013328R — Siemens EMS 3150, used in Renault vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 4817RT0013328R files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 5290RT0013328R Renault Kangoo1.2 90hpMap pack · 32 maps | Siemens EMS 3150 | 4817RT0013328R | 5290RT0013328R | 9937RPLANTECOS | €20 · OpenWith maps €70 |
| 6762RT0013328R Renault Megane III1.2 132hp | Siemens EMS 3150 | 4817RT0013328R | 6762RT0013328R | 1519RPLANTSIDI | €20 · Open |
No file in this list matches. Search all original files →
About 4817RT0013328R
4817RT0013328R is on 2 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Siemens EMS 3150 (2 files) control units.
Our catalogue lists them for the Renault Kangoo (1.2 90hp) and Renault Megane III (1.2 132hp).
Other numbers on these files: 2 software numbers (5290RT0013328R, 6762RT0013328R); 2 calibration / SW upgrade numbers (9937RPLANTECOS, 1519RPLANTSIDI).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 4817RT0013328R
- Files
- 2
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 2
ECU types with 4817RT0013328R 1
Vehicles with 4817RT0013328R 2
More Siemens EMS 3150 numbers 1
Tuning for Siemens EMS 3150 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 4817RT0013328R listed for?
In our catalogue: Renault Kangoo (1.2 90hp) and Renault Megane III (1.2 132hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 4817RT0013328R?
In our catalogue 4817RT0013328R is on files read from Siemens EMS 3150 (2 files) control units.
There are several 4817RT0013328R files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.