39120-2FBB3 original ECU files
3 original (stock) ECU files with the hardware number 39120-2FBB3 — Bosch EDC17C57, used in KIA vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 39120-2FBB3 files 3
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| 91UM54NMNERIR203 KIA Sorento2.2 197hp | Bosch EDC17C57 | 39120-2FBB3 | 91UM54NMNERIR203 | 91UM52NMNERIR203 0521 | €20 · Open |
| 91UM54NMNERIR204 KIA Sorento2.2 197hp | Bosch EDC17C57 | 39120-2FBB3 | 91UM54NMNERIR204 | 91UM52NMNERIR204 0539 | €20 · Open |
| E1UM54NMNERIR201 KIA Sorento2.2 197hp | Bosch EDC17C57 | 39120-2FBB3 | E1UM54NMNERIR201 | E1UM52NMNERIR201 8652 | €20 · Open |
No file in this list matches. Search all original files →
About 39120-2FBB3
39120-2FBB3 is on 3 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Bosch EDC17C57 (3 files) control units.
Our catalogue lists them for the KIA Sorento (2.2 197hp).
Other numbers on these files: 3 software numbers (91UM54NMNERIR203, 91UM54NMNERIR204, E1UM54NMNERIR201); 3 calibration / SW upgrade numbers (91UM52NMNERIR203_0521, 91UM52NMNERIR204_0539, E1UM52NMNERIR201_8652).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 39120-2FBB3
- Files
- 3
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 391202FBB3 · 39120 2FBB3
ECU types with 39120-2FBB3 1
Vehicles with 39120-2FBB3 1
Tuning for Bosch EDC17C57 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 39120-2FBB3 listed for?
In our catalogue: KIA Sorento (2.2 197hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 39120-2FBB3?
In our catalogue 39120-2FBB3 is on files read from Bosch EDC17C57 (3 files) control units.
There are several 39120-2FBB3 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.