Hardware number · 4 files

39100-2F125 original ECU files

4 original (stock) ECU files with the hardware number 39100-2F125 — Bosch EDC17CP14, used in KIA vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.

4files
1ECU types
1models
1makes

All 39100-2F125 files 4

VehicleECUHWSWCalibration / upgrade
83XM504ACVDRI1RT KIA Sorento2.2 16V CRDI 197hpMap pack · 77 maps Bosch EDC17CP14 39100-2F125 83XM504ACVDRI1RT 83XM504ACVDRI1RT 4631 €20 · OpenWith maps €60
83XM504ACVDRI2RT KIA Sorento2.2 16V CRDI 197hp Bosch EDC17CP14 39100-2F125 83XM504ACVDRI2RT 83XM504ACVDRI2RT 6243 €20 · Open
83XM504ACVDRI6RT KIA Sorento2.2 16V CRDI 197hp Bosch EDC17CP14 39100-2F125 83XM504ACVDRI6RT 83XM504ACVDRI6RT 7268 €20 · Open
81XM504ACVDRI1RT KIA Sorento2.2 192hp Bosch EDC17CP14 39100-2F125 81XM504ACVDRI1RT 81XM504ACVDRI1RT 3822 €20 · Open

About 39100-2F125

39100-2F125 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.

They were read from Bosch EDC17CP14 (4 files) control units.

Our catalogue lists them for the KIA Sorento (2.2 16V CRDI 197hp, 2.2 192hp).

Other numbers on these files: 4 software numbers (83XM504ACVDRI1RT, 83XM504ACVDRI2RT, 83XM504ACVDRI6RT, 81XM504ACVDRI1RT); 4 calibration / SW upgrade numbers (83XM504ACVDRI1RT_4631, 83XM504ACVDRI2RT_6243, 83XM504ACVDRI6RT_7268, 81XM504ACVDRI1RT_3822).

To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.

Number
39100-2F125
Files
4
Found as
hardware number
ECU types
1
Vehicles
1
Also written as
391002F125 · 39100 2F125

ECU types with 39100-2F125 1

Vehicles with 39100-2F125 1

Need a modified file?

Tuning for Bosch EDC17CP14 — done by our engineers

  • Stage 1 / Stage 2 / ECO
  • DPF / FAP OFF
  • EGR OFF
  • AdBlue / SCR OFF
  • DTC OFF
  • Speed limiter, Start&Stop

Questions

Which vehicles is 39100-2F125 listed for?

In our catalogue: KIA Sorento (2.2 16V CRDI 197hp, 2.2 192hp). Open the file page that matches your vehicle, engine and numbers.

Which ECU has 39100-2F125?

In our catalogue 39100-2F125 is on files read from Bosch EDC17CP14 (4 files) control units.

There are several 39100-2F125 files. Which one do I need?

The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.

How do I get the file?

Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.

What exactly do I receive?

The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.