2D1-8591A-70 original ECU files
4 original (stock) ECU files with the hardware number 2D1-8591A-70 — Denso 3C3-8591A-XX, used in Yamaha vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 2D1-8591A-70 files 4
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Yamaha FZ11000cc 150hp | Denso 3C3-8591A-XX | 2D1-8591A-70 | — | — | €20 · Open |
| Yamaha FZ11000cc 150hp | Denso 3C3-8591A-XX | 2D1-8591A-70 | — | — | €20 · Open |
| Yamaha R11.0 172hp | Denso 3C3-8591A-XX | 2D1-8591A-70 | — | — | €20 · Open |
| Yamaha R11.0 172hp | Denso 3C3-8591A-XX | 2D1-8591A-70 | — | — | €20 · Open |
No file in this list matches. Search all original files →
About 2D1-8591A-70
2D1-8591A-70 is on 4 original (stock) ECU files in our catalogue, always as the hardware number.
They were read from Denso 3C3-8591A-XX (4 files) control units.
Our catalogue lists them for the Yamaha FZ1 (1000cc 150hp) and Yamaha R1 (1.0 172hp).
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy. 4 of these files have the same numbers, ECU, vehicle and engine as another file in this list.
- Number
- 2D1-8591A-70
- Files
- 4
- Found as
- hardware number
- ECU types
- 1
- Vehicles
- 2
- Also written as
- 2D18591A70 · 2D1 8591A 70
ECU types with 2D1-8591A-70 1
Vehicles with 2D1-8591A-70 2
Tuning for Denso 3C3-8591A-XX — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 2D1-8591A-70 listed for?
In our catalogue: Yamaha FZ1 (1000cc 150hp) and Yamaha R1 (1.0 172hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 2D1-8591A-70?
In our catalogue 2D1-8591A-70 is on files read from Denso 3C3-8591A-XX (4 files) control units.
There are several 2D1-8591A-70 files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.