237105418S original ECU files
2 original (stock) ECU files with the calibration 237105418S — Hitachi BED501, used in Renault vehicles. The other numbers (software, calibration) tell these files apart: compare them with your own read and open the matching file.
All 237105418S files 2
| Vehicle | ECU | HW | SW | Calibration / upgrade | |
|---|---|---|---|---|---|
| Renault Megane IV1.8 300hp | Hitachi BED501 | — | — | 237105418S | €20 · Open |
| 237104299S 237102930S Renault Megane IV1.8 300hp | Hitachi BED501 | 237104299S | 237102930S | 237105418S | €20 · Open |
No file in this list matches. Search all original files →
About 237105418S
237105418S is on 2 original (stock) ECU files in our catalogue: as the calibration on 2 files and as the SW upgrade number on 2 files.
They were read from Hitachi BED501 (2 files) control units.
Our catalogue lists them for the Renault Megane IV (1.8 300hp).
Other numbers on these files: 1 hardware number (237104299S), listed on 1 of the 2 files; 1 software number (237102930S), listed on 1 of the 2 files.
To choose, compare every number of your own read — HW, SW, calibration and SW upgrade where listed — with each file page before you buy.
- Number
- 237105418S
- Files
- 2
- Found as
- calibration and SW upgrade number
- ECU types
- 1
- Vehicles
- 1
- Also written as
- 237 105 418 S
ECU types with 237105418S 1
Vehicles with 237105418S 1
Tuning for Hitachi BED501 — done by our engineers
- Stage 1 / Stage 2 / ECO
- DPF / FAP OFF
- EGR OFF
- AdBlue / SCR OFF
- DTC OFF
- Speed limiter, Start&Stop
Questions
Which vehicles is 237105418S listed for?
In our catalogue: Renault Megane IV (1.8 300hp). Open the file page that matches your vehicle, engine and numbers.
Which ECU has 237105418S?
In our catalogue 237105418S is on files read from Hitachi BED501 (2 files) control units.
There are several 237105418S files. Which one do I need?
The one whose numbers match your own read: compare HW, SW, calibration and SW upgrade where they are listed on the file page. All sales are final, so check before you buy.
How do I get the file?
Open the file page and use Quick buy: €20 by card, no registration. We request the file from the original-file database and e-mail it to you — usually within minutes, normally within 24 hours. With an account on our file service fs.auto-remap.com you can also top up your balance and order there.
What exactly do I receive?
The original read only, as a ready-to-use .bin file (ordered through a file-service account: a ZIP archive with an .ori file inside). No full backups, EPROMs, SGO, VBF or other formats. Different tools expect different file sizes when writing, so make sure the file suits your device. All sales are final: check HW and SW against your own read before you buy.